Adj 9.15 Finisher Folder Position; Adj 9.16 Calibrate For Paper - Xerox Phaser 7760 Service Manual

ADJ 9.15 Finisher Folder Position

Procedure
Refer to ADJ 12.5, ADJ 12.6, ADJ 12.7,
cedures.
Repairs and Adjustments
ADJ 9.15, ADJ 9.16
ADJ 12.9, and ADJ 12.10 (Section 4) for detailed pro-

ADJ 9.16 Calibrate for Paper

Purpose
Calibrate for Paper is used for adjusting the printer for various paper types and environmental
conditions. You may need to readjust the printer when you change brands, paper types, or the
temperature or humidity changes significantly.
Procedure
NOTE: Ensure to load 8 x 11 media (LEF) in Tray 1 (MPT) to perform this procedure.
1. Go to the Printer Menu. Scroll down the menu to find Troubleshooting and press OK.
2. Select Print Quality Problems and press OK.
3. Scroll down the menu to find Calibrate for Paper and press OK.
4. Select Calibrate for Paper Pages and press OK.
5. The printer prints 9 Calibrate for Paper pages.
6. Follow the instructions on the Calibrate for Paper to perform the procedure.
January 2010
4-108
Revised
Phaser 7760 Color Laser Printer