Xerox Phaser 7760 Service Manual page 155

008-624 Regicon Data Overflow (Patch Magnification)
MAG Adjusted Set Point of operation results for each of Y,M,C exceeded the set range
(NVRAM value: 0~1432).
NOTE: Status Code not displayed on UI. Machine operation continues.
Procedure
Check the IBT Belt and Drum for a scratch or contamination. The check is OK.
Y N
Replace as required.
Perform RegiCon Adjustment procedure
Revised
Phaser 7760 Color Laser Printer
ADJ 9.10.
008-625 Regicon Sample Block (A1 Patch-rear)
At A1 (IN) patch detection, the number of the sample blocks does not reach the specified num-
ber.
NOTE: Status Code not displayed on UI. Machine operation continues.
Procedure
Check the IBT Belt and Drum for a scratch or contamination. The check is OK.
Y N
Replace as required.
Perform RegiCon Adjustment procedure
January 2010
2-119
ADJ 9.10.
Status Indicator RAP's
008-624, 008-625