Xerox Phaser 7760 Service Manual page 439

Unfused Image or Image Easily Rubs Off of Page
The toner image is not completely fused to the paper. The image easily rubs off. The printer
displays no error code.
Figure 12 Unfused or Image Easily Rubs Off Page
1. Ensure that the paper you are using is
• the correct type for the printer,
• correctly loaded in the printer, and
• loaded in the correct tray.
Perform Paper Tips Page procedure (Printer Menu > Troubleshooting > Paper Jams >
Paper Tips Page). The printer prints 3 Paper Tips pages. Follow the instructions on the
Paper Tips Page to perform the procedure.
2. Ensure that the paper loaded in the tray matches the paper type selected on the printer's
Control Panel.
3. If the problem continues, change the paper type to the next heavier type than existing
type from the Control Panel Menu.
4. Check for paper wrapped around or blocking the Fuser Roller. Inspect the Fuser Roller for
damage. Replace the Fuser if necessary.
Revised
Phaser 7760 Color Laser Printer
Toner on Back of Print
There is toner on the back of the printed sheet of paper.
Figure 13 Toner on Back of Print
1. Clean the printer interior.
2. Inspect the paper that is loaded in the paper trays.
• Is the paper clean and free of toner?
3. Try to print using supported media.
4. Ensure that the loaded media matches the Control Panel settings. In some cases, switch-
ing the paper type setting, for example from Heavy Laser Paper to Thin Cover/Index,
may improve the print-quality.
5. Perform the Fuser cleaning pages.
6. After the Fuser has been cleaned, change the paper setting to one type heavier.
7. If the Transfer Roller or Belt Cleaner Assembly is near the end of its life, replace that part.
January 2010
3-15
Initial Actions Before Troubleshooting
Image Quality