Table of Contents
Advertisement
CLEANING & MAINTENANCE
4.6
REPLACING DOOR AND DOOR HINGE
Removing Door:
1. Remove grub screw from lower hinge as per Figure
4B. Door will need to be in the closed position to
access screw.
2. Open door to the maximum open position.
3. Remove security pin from the top of the hinge pin
as per Figure 4C.
4. Slide door up to remove from lower hinge.
5. Tilt bottom out and lower to remove from the top
hinge.
6. Place in a safe location to ensure it isn't damaged.
Installing Door:
1. As per Figure 4E, ensure that the lower hinge is in
the open position. Use a 7mm wrench to open if it
is not already.
2. Follow removal instrcutions in reverse to reinstall
door.
Grub Screw
Security Pin
PAGE 37
Replacing Door Hinge:
1. Remove door as per above instructions. Multiple
2. Remove the plastic cover, front bumper and front
3. Once available, remove the screw holding the
4. Remove hinge and replace.
FIGURE 4B
In reverse order replace hinge and door assemblies,
ensuring all parts are retained in their original locations.
FIGURE 4C
doors may need to be removed if door is in centre
of the case.
panel as per Figure 4D.
hinge in place as per Figure 4E.
Remove
Ensure Hinge is
Remove Screw
in Open Position
PMM20F3R MULTIDECK - HUSSMANN
FIGURE 4D
FIGURE 4E
Advertisement
Table of Contents
