Table of Contents
Advertisement
INSTALLATION
3.1
POSITIONING AND LEVELLING
FIGURE 3C - Levelling Case
FIGURE 3D - Lining Up Case
PAGE 14
Level Front to Back
Level Side to Side
NOTE:
It is important that all cases are
level for correct case joining, operation and
door alignment. DO NOT SET CASE LEVELS
OFF THE PATCH END fitted to a case.
Make sure case is level:
Front to Back: +/- 1.5mm
Side to Side: +/- 1.5mm (Figure 3C)
NOTE:
It is important that all cases are
.
lined up
USE THE CHASSIS AS MAIN POINT
OF REFERENCE WHEN LEVELLING.
NOTE:
Use string line to align with
datum point when lining up multiple
cases.
The bumper support and front ticket
strip must be removed before lining up
the cases.
Laser lines or spirit levels are also
good instruments to use while lining
a case up.
NOTE: All feet need to be loaded
evenly on the ground. If this is not
undertaken this could cause the
chassis to twist.
PMM20F3R MULTIDECK - HUSSMANN
Advertisement
Table of Contents
