INSTALLATION
3.15
MOUNTING MIRROR KIT
•
Start with lower mirror brackets first.
•
Two cutouts are provided at the top of each up-
right frame, for fitting the mirror lower brackets.
•
The brackets will need to be fitted in the upper
cutout.
•
Insert top end of bracket first, as shown in Figure
3AP.
•
Once top of bracket has been fully inserted, drop
bottom of bracket towards the case upright as
shown in Figure 3AQ.
Bracket Insert Here
PAGE 29
•
•
•
•
FIGURE 3AP
FIGURE 3AQ
Once lower brackets are fitted, commence fitting
of upper mirror brackets.
Two pairs of holes are provided at the back end of
the ceiling panel. The brackets are to be fitted to
the rear pair of holes in the ceiling panel.
Fasten upper brackets to ceiling panel with the tek
screws provided as shown in Figure 3AR.
Repeat upper bracket fastening for each end of the
mirror as shown in Figure 3AS.
Bracket Insert Here
PMM20F3R MULTIDECK - HUSSMANN
FIGURE 3AR
FIGURE 3AS