Replacing Door And Door Hinge - Hussmann PSM15E3R Installation Manual

CLEANING & MAINTENANCE
4.6

REPLACING DOOR AND DOOR HINGE

Replacing Door:
1. Remove grub screw from lower hinge as per Figure
4B. Door will need to be in the closed position to
access screw.
2. Open door to the maximum open position.
3. Remove security pin from the top of the hinge pin
as per Figure 4C.
4. Slide door down and place in a safe location.
Grub Screw
Security Pin
PAGE 34
Replacing Door Hinge:
1. Remove door as per above instructions. Multiple
2. Remove the plastic cover, front bumper and front
3. Once available, remove the screw holding the
4. Remove hinge and replace.
FIGURE 4B
In reverse order replace hinge and door assemblies,
ensuring all parts are retained in their original locations.
FIGURE 4C
doors may need to be removed if door is in centre
of the case.
panel as per Figure 4D.
hinge in place as per Figure 4E.
Remove
Remove Screw
PSM15E3R SEMI-VERTICAL - HUSSMANN
FIGURE 4D
FIGURE 4E