Table of Contents
Advertisement
INSTALLATION
3.15
MOUNTING MIRROR KIT
•
At this point, there should be two lower brackets
and two upper brackets fitted to the bay where the
mirror is being installed.
•
First, place the bottom edge of the mirror onto the
lower brackets as shown in Figures 3AT and 3AU.
PAGE 30
•
•
•
•
•
•
•
FIGURE 3AT
Push Up to Install
FIGURE 3AU
FIGURE 3AW
Once mirror is in the bottom brackets, gently
move top edge of mirror towards the upper brack-
ets as shown in Figure 3AV.
When top edge of mirror is touching the upper
brackets, push upper bracket upwards by the push
tab provided.
While pushing up on the upper bracket, move
mirror into position and then release the upper
bracket. This is shown in Figure 3AW.
Repeat this at the other end of the mirror.
Ensure mirror ends are correctly aligned with the
case bay.
Once all these steps are done, mirror installation is
complete.
PMM20F3R MULTIDECK - HUSSMANN
FIGURE 3AV
Advertisement
Table of Contents
