Ip Interfaces; Figure 29 Basic Setting > Ip Setup; Table 11 Basic Setting > Ip Setup - ZyXEL Communications ES-2024 - V3.80 User Manual

Table of Contents

Advertisement

Chapter 7 Basic Setting

7.6.1 IP Interfaces

The Switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP
address. The factory default subnet mask is 255.255.255.0.
Configure IP addresses for accessing and managing the Switch from the ports belonging to the
pre-defined VLAN(s). See
configure.
Figure 29 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 11 Basic Setting > IP Setup
LABEL
Domain Name
Server
Default Management IP Address
Configure the fields to set the default management IP address.
DHCP Client
72
Table 99 on page 238
DESCRIPTION
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Select this option if you have a DHCP server that can assign the Switch an IP
address and subnet mask, a default gateway IP address and a domain name server
IP address.
for how many IP addresses you can
ES-2024 Series User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dimension es-2024aDimension es-2024pwrEs-2024 series

Table of Contents