Table of Contents
Advertisement
Setting Judgment Conditions
Set both HIGH and LOW threshold values for outputting alarms. There are three judgment
outputs: HIGH, PASS and LOW.
HIGH threshold value
Measured value
LOW threshold value
ON
HIGH
OFF
Out-
ON
PASS
OFF
put
ON
LOW
OFF
Hysteresis (hysteresis width) can also be set to threshold values. Set hysteresis when judgments are
unstable to prevent chattering.
Selecting the Measurement Data Source p.4-2
TEACH Mode
Method
DIRECT IN
The threshold values can be set by directly inputting numerical values.
(L/R/UP/DOWN keys)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Alarm Output
(ON when Measurement result >
HIGH threshold)
(ON when LOW threshold
≤
Measurement result
HIGH threshold)
(ON when Measurement result <
LOW threshold)
Details
Section 4
≤
ZS-DSU
4-3
User's Manual
Advertisement
Table of Contents
