Table of Contents
Advertisement
(7) Control keys
The Control Keys are for setting logging conditions and other information. The func-
tions assigned to the Control Keys change according to the operating mode.
Displays and Key Operations p.3-5
(8) Mode Switch
The Mode Switch selects the operating mode.
RUN mode
: Select this mode when performing regular logging.
TEACH mode : Select this mode when setting the judgment thresholds for alarm output.
FUN mode
: Select this mode when setting logging conditions.
(9) Threshold Selector Switch
The Threshold Selector switch selects whether to set (or display) the HIGH or LOW
threshold.
(10) OUT indicator
Lits during alarm output
(11) Coupler
This connector is for connecting the Multi-Controller or the Sensor Controller.
(12) RS-232C connector
Connect the RS-232 cable when you are connecting the Data Storage Unit to a per-
sonal computer that does not have a USB port.
(13) I/O Cable
The I/O cable connects the Data Storage Unit to the power supply and external
devices, such as timing sensors or programmable controllers.
(14) USB port
Connect the USB cable to the USB port to connect to a personal computer.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Section 1
Part Names and Functions
ZS-DSU
User's Manual
1-9
Advertisement
Table of Contents
