Table of Contents
Advertisement
■ Time
Set the time (hours, minutes, seconds) from the start trigger up to the end trigger. Data
logging ends when the preset time is reached since the start trigger.
The system clock must be set on the ZS-DSU beforehand.
Setting the System Clock p.3-34
FUN Mode-[LOGING]-[TRIGGER]-[END]-[TIME]
<When set at 1 hour>
1 hour
Logging period
Start Trigger
■ DATA POINTS
Set the number of data points to acquire. Data logging ends when the preset number of
data points has been got since start of logging. One cycle set at [SAMPLING]-[INTER-
VAL] is one data item.
FUN Mode-[LOGING]-[TRIGGER]-[END]-[QUANT]
<When data points are set at 7>
Logging period
Start Trigger
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Measured value
Logging end
Measured value
Sampling
Logging end
Section3
Setting the Logging Conditions
User's Manual
ZS-DSU
3-25
Advertisement
Table of Contents
