Table of Contents
Advertisement
Section3
About Setup
About Setup
Basic Knowledge for Operation
The following describes basic operation of the Data Storage Unit before you set it up.
■ Switching Modes
The ZS-DSU has the following 3 operating modes.Switch to the desired mode before
you start operation. Basically, the RUN mode is switched to and logging starts after log-
ging conditions are set in the FUN mode.
To switch the operating mode, use the Mode Switch.
FUN Mode
TEACH Mode
RUN mode
When you switch the operating mode after changing the measurement conditions, you will be
prompted to save the settings. Save the settings as required. If you turn off the Digital Storage Unit
without saving these settings, the newly set measurement conditions will be cleared from memory.
You can also save all the settings later on.
ZS-DSU
3-4
User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Mode
Mode for setting the logging conditions
This mode is for setting the threshold values for alarm output.
This mode is for executing logging. This mode is for setting the details of the
main display and other display-related items, and when using the external
bank function.
Saving setup data p.3-33
FUN
RUN
TEACH
Description
Advertisement
Table of Contents
