Advertisement
Chapter 6
Step 9: Click the Auto D/A Calibration tab to show the D/A channel
auto calibration panel. Please finish the A/D calibration
procedure first before you start the D/A calibration procedure.
There are two D/A channels in PCI-1712; select the output
range for each channel and then press the start button to
calibrate D/A channels (Fig. 6-9).
Step 10: D/A channel 0 calibration is enabled (Fig. 6-10)
PCI-1712/1712L User's Manual
Figure 6-9: Range Selection in D/A Calibration
Figure 6-10: Calibrating D/A Channel 0
– 62 –
Get other manuals https://www.bkmanuals.com
Advantech Co., Ltd.
www.advantech.com
Advertisement
