Advertisement
Following through the Setup and Configuration procedures to the last
step described in the previous section, you can now proceed to test
the device by clicking the Test Button on the I/O Device Installation
dialog box (Fig. 2-8). A Device Test dialog box will appear accordingly:
Figure 2-9: Analog Input tab on the Device Test dialog box
On the Device Test dialog box, users are free to test various functions
of PCI-1712/1712L on the Analog input, Analog output, Digital input,
Digital output or Counter tabs.
Note:
You can access the Device Test dialog box either by the previous
procedure for the Device Installation Program or simply by accessing
Start/Programs/Advantech Driver for 95 and 98 (or for NT) /Test
Utility.
Click the Analog Input tab to bring it up to front of the screen. Select
the input range for each channel in the Input range drop-down boxes.
Configure the sampling rate on the scroll bar. Switch the channels by
using the up/down arrow.
Advantech Co., Ltd.
www.advantech.com
Get other manuals https://www.bkmanuals.com
– 15 –
PCI-1712/1712L User's Manual
Chapter 2
Advertisement
