Advertisement
Chapter 2
Figure 2-10: Analog Input tab on the Device Test dialog box
Click the Analog Output tab to bring it up to the foreground. The
Analog Output tab allows you to output quasi-sine, triangle, or square
waveforms generated by the software automatically, or output single
values manually. You can also configure the waveform frequency and
output voltage range.
Figure 2-11: Analog Output tab on the Device Test dialog box
Click the Digital Input tab to show forth the Digital Input test panel
as seen below. Through the color of the lamps, users can easily discern
whether the status of each digital input channel is either high or low.
PCI-1712/1712L User's Manual
– 16 –
Get other manuals https://www.bkmanuals.com
Advantech Co., Ltd.
www.advantech.com
Advertisement
