Removing The Engine Guard (Exc-F Six Days) - KTM 250 EXC-F SIX DAYS 2022 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.46
92
V01817-10
E00515-10
E00339-10
Removing the engine guard (EXC‑F Six Days)
H01638-10
(EXC‑F BR)
–
4
Fill bleeding syringe
fluid.
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove the protection cap,
remove bleeder screw
(All EU models)
–
4
Fill bleeding syringe
fluid.
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove bleeder protection
cap, remove the bleeder screw
4
syringe .
–
Inject the liquid into the system until it escapes from open-
6
ings of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim
–
Position cover with membrane. Mount and tighten screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
–
1
Remove screws and engine guard.
with the appropriate hydraulic
p. 158)
5
and mount bleeding syringe
with the appropriate hydraulic
p. 158)
5
and mount bleeding
4 mm (0.16 in)
4
.