12.11
Installing the lower triple clamp
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01788-10
(EXC‑F EU/BR)
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
B01605-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
–
Secure the wiring harness and the clutch line with the cable
holder.
V01785-11
SERVICE WORK ON THE CHASSIS 12
3
4
and protective ring
p. 160)
1
2
3
and O-ring
4
, but do not tighten yet.
.
is correctly posi-
.
65