Table of Contents
Advertisement
13.6
Checking the front brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
13.7
Changing the brake linings of the front brake
Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop
will be glad to help.)
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Take off cover
–
Add brake fluid to level
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Immediately clean up any brake fluid that has over-
flowed or spilled with water.
V01770-10
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the brake linings of the front brake.
(
p. 97)
–
Check the brake linings for damage and cracking.
»
If damage or cracking is visible:
–
Change the brake linings of the front brake.
E00342-10
(
p. 97)
1
.
2
3
with membrane
.
A
.
5 mm (0.2 in)
p. 158)
≥ 1 mm (≥ 0.04 in)
A
BRAKE SYSTEM 13
A
.
97
Advertisement
Table of Contents
