11.6
Measuring the dimension of the rear wheel unloaded
–
Turn adjusting screw
click.
–
Turn counterclockwise by the number of clicks corresponding
to the shock absorber type.
Guideline
Info
Turn clockwise to increase the damping; turn counter-
clockwise to reduce damping when the shock absorber
S01314-10
rebounds.
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Position the sag gage in the rear axle and measure the
distance to marking SAG on the rear fender.
Sag gauge (00029090100)
Pin, sag scale (00029990010)
–
Note the value as dimension
402415-10
Finishing work
–
Remove the motorcycle from the lift stand. (
TUNING THE CHASSIS 11
1
clockwise up to the last perceptible
p. 60)
A
.
p. 60)
51