12 SERVICE WORK ON THE CHASSIS
12.21
12.22
74
Removing the seat
S03480-10
H02218-10
Mounting the seat
H02218-11
S03480-10
–
1
Remove screw
.
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is correctly latched in place.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
1
.
M6
10 Nm (7.4 lbf ft)