11
SERVICE WORK ON THE CHASSIS
11.19
Installing the shock absorber
11.20
Removing the seat
11.21
Mounting the seat
Main work
–
Push splash protector
tighten screw
Guideline
Screw, top shock absorber
–
Mount and tighten screw
Guideline
H01367-11
Screw, bottom shock
absorber
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
–
Raise the rear of the seat, pull the seat back, and lift it off.
H01368-10
–
Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
S01175-10
–
Mount and tighten screw
Guideline
Remaining screws, chassis
H01368-10
to the side and position the shock absorber. Mount and
.
M12
.
M12
.
of the seat fixing.
60 Nm
Loctite
(44.3 lbf ft)
60 Nm
Loctite
(44.3 lbf ft)
p. 32)
M6
10 Nm (7.4 lbf ft)
40
®
2701™
®
2701™