7
PREPARING FOR USE
7.7
Preparing for rides at high temperature and slow speed
7.8
Preparing for riding at low temperatures or in snow
–
Fit the steel sprocket.
–
Clean the motorcycle. (
–
Straighten bent radiator fins carefully.
600868-01
–
Check the radiator cap.
Value on radiator cap
»
If the displayed value does not meet specifications:
L00021-10
–
Change the radiator cap.
–
Adjust the secondary drive to the road conditions.
Info
The engine oil heats up quickly when the clutch is operated frequently due
to an excessively high secondary drive.
–
Clean the chain.
Chain cleaner (
–
Clean the radiator fins.
600868-01
–
Straighten bent radiator fins carefully.
–
Check the coolant level. (
–
Fit a rain cover on the air filter.
Waterproofing device for air filter (59006021000)
Info
See the KTM PowerParts fitting instructions.
–
Adjust the carburetor jetting and the setting.
Info
M01073-01
Your authorized KTM workshop can recommend the right carburetor tuning.
p. 77)
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling sys-
tem components if the engine or the cooling system are at oper-
ating temperature.
–
Allow the cooling system and the engine to cool down before you
open the radiator, the radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area affected immediately
with lukewarm water.
p. 89)
p. 69)
1.8 bar (26 psi)
19