Table of Contents
Advertisement
11
SERVICE WORK ON THE CHASSIS
11.6
Installing the fork legs
11.7
Removing the fork protector
Main work
–
Position the fork legs.
Bleeder screws
Info
The second milled groove (from the top) must be flush with the top edge of
the upper triple clamp.
H01352-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
H01354-11
–
Position the brake caliper with spacers and fit and tighten screws
Guideline
Screw of brake caliper
–
Position the brake line and clamp. Mount and tighten screws
S01158-11
Finishing work
–
Install the front wheel.
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Remove screws
S01159-10
–
Remove screws
S01160-10
are positioned toward the front.
.
.
M8
(
p. 64)
. Take off the clamp.
on the left fork leg. Take off the fork protector.
on the right fork leg. Take off the fork protector.
M8
20 Nm
(14.8 lbf ft)
M8
15 Nm
(11.1 lbf ft)
.
25 Nm
Loctite
(18.4 lbf ft)
.
p. 32)
34
®
243™
Advertisement
Table of Contents
