11
SERVICE WORK ON THE CHASSIS
–
Fill bleeding syringe
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove bleeder screw
syringe
H01381-10
–
Inject the liquid into the system until it escapes from opening
cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
–
Position the cover with the membrane. Mount and tighten the screws.
S01162-10
Info
Clean up overflowed or spilled brake fluid immediately with water.
with the appropriate hydraulic fluid.
p. 87)
.
and mount bleeding
of the master
4 mm (0.16 in)
53