Service Work On The Chassis; Raising The Motorcycle With The Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 85 SX 19/16 2017 Owner's Manual

11

SERVICE WORK ON THE CHASSIS

11.1

Raising the motorcycle with the lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
11.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
1 0 0 1
11.3

Bleeding the fork legs

–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78929955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
dle.
Info
Remove the plug-in stand before riding.
402001-10
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
H01352-10
Finishing work
–
Remove the motorcycle from the lift stand. (

into the left side of the wheel spin-
p. 32)
 .
p. 32)
32