13
WHEELS, TIRES
13.1
Removing the front wheel
13.2
Installing the front wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Loosen screw
–
Loosen screws
–
Press on screw
–
Remove screw
S01171-10
Warning
Danger of accidents Damaged brake discs reduce the braking effect.
–
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of
the fork.
Info
H01396-10
Do not pull the hand brake lever when the front wheel is removed.
–
Remove spacers
H00934-10
Main work
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease shaft seal rings
Long-life grease (
–
Insert the spacers.
H00935-10
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
S01171-11
by several rotations.
.
to push the wheel spindle out of the axle clamp.
.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
.
and contact surface
p. 89)
.
p. 32)
of the spacers.
M20x1.5
35 Nm
(25.8 lbf ft)
64