MN003475A01-B
Chapter 7: IMS VoLTE
6 Tap
to end the call.
7.2.1
Receiving IMS Video Calls
If your private system supports VoLTE calls, users can receive a video call from another user.
When and where to use:
Use this procedure to receive a video call on the LEX device.
Procedure:
1 When callee receives a video call, user swipes one of the following choices from the device
screen:
•
Voice Only - Audio Only
•
Video Transmit - Video Send only
•
Video Receive - Video Receive only
•
VT - Video send/receive
Figure 36: Receiving Video Call
NOTICE: While ViLTE call in progress, each user will see video on their respective
device for full duplex video. In case of send only or receive only, the contact picture
displays.
2 Tap
to end the call.
7.2.2
Enabling IMS Video Calling
Video Calling allows the user to send and receive Video Calls.
When and where to use:
96
Send Feedback