Removing Microsd Or Cryptr Card; Installing Public And Private Sim Cards; Figure 5: Installing The Microsd Or Cryptr Micro Encryption Card - Motorola LEX L10i User Manual

MN003475A01-B
Chapter 2: Getting Started

Figure 5: Installing the microSD or CRYPTR micro Encryption Card

2.3.4

Removing microSD or CRYPTR Card

This procedure explains how to remove a microSD or CRYPTR micro encryption card.
Procedure:
1 Press and hold the Power button for three seconds.
2 Touch Power Off.
3 Lift the battery cover.
4 Push the Card Holder lock down to release the card.
5 Remove the card from the holder.
6 Replace the battery cover.
2.3.5

Installing Public and Private SIM Cards

Public and private phone services require a Subscriber Identification Module (SIM) card.
Prerequisites: The SIM card can contain the following information:
• Mobile phone service provider account details.
• Information regarding service access and preferences.
• Contact information, which can be moved to the People application on the LEX device.
• Any additional subscribed services.
NOTICE: The LEX device requires activated SIM cards. Obtain activated SIM cards from your
organization administrator.
CAUTION:
• Electrostatic discharge (ESD) precaution.
• For proper ESD precautions to avoid damaging the SIM card. Proper ESD precautions
include, but not limited to, working on an ESD mat and ensuring that the user is properly
grounded.
When and where to use: Use this procedure to install a SIM card:
Procedure:
1 If the battery is in place, remove the battery as described in
36
Removing Battery on page
Send Feedback
38.