Table of Contents
Advertisement
MN003475A01-B
Chapter 12: Accessories
12.3
Desktop Cradle
A desktop cradle provides an alternative method to charge your LEX device.
The desktop cradle:
•
Provides power for charging and operating the device.
•
Enables connecting a mouse to the device.
Figure 71: Desktop Cradle
Charging the LEX Device
To charge the device, insert the units by placing the bottom of the device, at a slight forward angle, into
the cradle.
The LED shows the status of the battery charging. See Battery Charge LED Status for charging status
indications. The 2280 mAh battery charges in approximately four hours.
Charge the LEX device in temperatures from 0°C to +45°C (32°F to 113°F) ). Note that charging is
intelligently controlled by the device. To accomplish this, for small periods of time, the LEX device
alternately enables and disables battery charging to keep the battery at acceptable temperatures. The
device indicates when charging is disabled due to abnormal temperatures via its notification LED.
12.4
Vehicle Cradle
Install the vehicle mount on the surface of the vehicle that is reasonably flat and free of dirt and oil.
Clean the mounting surface with a glass cleaner and a clean cotton cloth. Install the vehicle mount on
the windshield or other flat car surface.
CAUTION: Some states prohibit the mounting of any electronic device in any location on the
vehicle dashboard. Be sure to check with local laws acceptable mounting areas before installing
the auto mounting kit.
158
Send Feedback
Advertisement
Chapters
Table of Contents
Troubleshooting
