MN003475A01-B
Chapter 2: Getting Started
Figure 7: Installing the Battery
3 Press the top of battery into place.
4 Place the battery cover into place.
5 Ensure that all battery cover snaps are fully engaged.
2.3.8
Removing Battery
When and where to use: Perform this procedure to remove the battery.
Procedure:
1 Slide a finger nail (preferably a thumb nail) into the Battery Cover removal slot and gently pull
the Battery Cover away from the device.
2 Remove the battery cover.
3 Slide the Battery Lock up and hold it.
4 With the tip of your finger, lift up the battery from the side closest to the top side of the device.
2.4
Charging Information
Before using for the first time, charge the battery using the provided USB Charger and USB Cable or
connect the USB Cable to the USB port of a personal computer. An unused battery fully charges in
less than six hours.
The battery can also be charged by one of the optional charging cradles.
38
Send Feedback