Front Panel(S) Installation; Front Panel(S) Installation With Rear Hard Top Removed - Jeep 2014 Wrangler Owner's Manual

Front Panel(s) Installation

NOTE: Set the panels on the windshield frame so that
there is no overhang. Also, make sure that the panels are
sitting flush with the body.
1. Install the right panel first, then the left panel.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213
2. Reinstall the panel(s) using the same steps for removal
in reverse order.
Front Panel(s) Installation With Rear Hard Top
Removed
1. Turn the left and right panels over and move the
spacer block (located on the rear of the panel) upward
90 degrees.
3