Lenovo 5457 Installation And Service Manual page 47

Chassis screws
Figure 18. Side cover removal for 4U server model with non-hot-swap power supplies
Attention: For proper cooling and airflow, replace the server cover before you turn on the server.
6. If you are instructed to return the side cover, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
For the 5U server model with hot-swap power supplies, complete the following steps to remove the side
cover. For 4U server models with non-hot-swap power supplies, please see the above sub-section.
1. Read the safety information in
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
"Turning off the server" on page
3. Unlock the side cover; then, press the cover-release latch down (as shown in the illustration) to remove
the cover.
"Safety" on page v and
23).
"Installation guidelines" on page
.
Chapter 2
31.
Installing optional devices
35