Hard disk Cage
Figure 96. Hard disk drive cage removal for 5U server model with hot-swap power supplies
Replacing the hard disk drive cage
Use this information to replace the hard disk drive cage
To install the hard disk drive cage on 4U server models with non-hot-swap power supplies, complete the
following steps. For the 5U server model with hot-swap power supplies, please see the next sub-section.
1. Read the safety information in
2. Press the hard disk drive cage in until the release latches click into place.
"Safety" on page v
and
"Installation guidelines" on page
.
Chapter 6
Removing and replacing components
31.
189