SMC Networks ZK2-ZS L A Series Operation Manual page 40

Digital pressure switch for vacuum

Table of Contents

(1) Press the

button once in measurement mode. (Refer to page 38)

(2) "P1" and the set value are displayed in turn.

(3) Press the

The

button is to increase vacuum pressure and the

•Press the

button once to increase by one digit, and press it continuously to keep increasing the set

value.

•Press the

button once to decrease by one digit, press it continuously to keep decreasing the set

value.

button to complete the setting of "P1". The display shows [H1] and the set value in turn.

(4) Press the

The

button is to increase and the

button to complete the setting of "H1". The display shows [P2] and the set value in turn.

(5) Press the

The

button is to increase and the

button to complete the setting of "P2". The display shows [H2] and the set value in turn.

(6) Press the

The

button is to increase and the

button to change the set value.

button is to decrease the set value.

button is to decrease.

-39-

Doc. No. DOC1051887

Table of Contents

Zb1-zs l a series Zl3-vp 1 l a series Zq-zs l a series