F1 Vacuum Pressure/Hysteresis - SMC Networks ZK2-ZS L A Series Operation Manual

■[F 1] Setting of vacuum confirmation pressure/hysteresis
The output of P1 can be set.
<Operation>
Press the or
Setting of pressure
Press the or
adjust pressure setting.
Setting of hysteresis
Press the or
select hysteresis.
[F 1] Setting of vacuum confirmation pressure/hysteresis complete.
button in function selection mode to display [F 1].
Press the button to set.
button to
Press the button to set.
button to
Press the button to set.
Move on to setting of pressure.
Move on to setting of hysteresis.
Return to function selection mode.
-46-
Doc. No. DOC1051887