F7 Auto Preset - SMC Networks ZK2-ZS L A Series Operation Manual

■[F 7] Auto preset
This function calculates and sets the pressure values automatically based on the on-going operation.
<Operation>
Press the or button in function selection mode to display [F 7].
Auto preset setting
or
Press the
Press button in measurement mode to set pressure. (Refer to page 53)
Then press button again to change the pressure while the display is flashing.
: The setpoint may be corrected by the auto preset function.
Press the button.
button to select auto-preset.
Press the button to set.
Setting of [F 7] Auto preset completed.
Move on to setting of auto-preset function.
Return to function selection mode.
-52-
Doc. No. DOC1051887