SMC Networks ZK2-ZS L A Series Operation Manual page 28

●Detailed product individual parameters (continued)
[F0] PoE (Output process data during communication error parameter) (Index 2310)
Sub index Data type Access
0 U8
[F80] ECo (Power saving mode parameter) (Index 2400)
Sub index Data type Access
0 U8
[F81] Security code (Security code parameter) (Index 2410)
Sub index Data type Access
1 U8
2 U16
[F0] ord (Output priority) (Index 4000)
Sub index Data type Access
0 U8
[F0] Cnt (Energy saving control parameter) (Index 4010)
Sub index Data type Access
0 U8
The energy saving operation is not available for ZB series, this parameter should be set to 0 (off).
Default value
(dec)
Setting of output process data during IO-Link communication error.
0x00
R/W 0: off
(0)
1: hold
Default value
(dec)
Setting of pawer setting mode
0: off
0x00
R/W 1: on1 (the brightness of the whole display is reduced)
(0)
2: on2 (When there is no operation for 30 minutes, the display is off.
Default value
(dec)
Setting of pincode usage when Device Access Lock (Local User Interface lock) is
0x00 unlocked
R/W
(0) 0: Unused
1: Used
0x0000 Setting of security code
R/W
(0) Setting range: 0 to 999
Default value
(dec)
Setting the priority operation when a vacuum instruction and a release instruction are
input simultaneously.
0x00
R/W 0: Vacuum
(0)
1: Release
2: No priority
Default value
(dec)
Setting of energy saving control. Refer to "example of ejector operation".
0x00
0：off
R/W
(0)
1：on
Only the decimal point flashes.)
-27-
Description
Description
Description
Description
Description
Doc. No. DOC1051887