F14 Zero Cut-Off - SMC Networks ZK2-ZS L A Series Operation Manual

■[F14] Zero cut-off
When the pressure display value is close to zero, the product rounds the value and zero will be displayed.
The zero cut-off range is 0.0 to 10.0% F.S., and can be set in 1.0% F.S. increments.
<Operation>
Press the or button in function selection mode to display [F14].
Display resolution setting
or
Press the
Press the button.
button to select display resolution.
Press the button.
Press the button to set.
Setting of [F14] Zero cut-off completed.
Move on to zero cut-off setting.
Return to function selection mode.
-56-
Doc. No. DOC1051887