SMC Networks ZK2-ZS L A Series Operation Manual page 31

●Detailed product individual parameters (continued)
[F5] P5 setting (P5 pressure confirmation parameter) (Index 4240)
Sub index Data type Access
1 S16 R/W
2 S16 R/W
3 U16 R/W
4 U16 R/W
Output check (Input process data forced on mode parameter) (Index 7000)
Sub index Data type
0 U8
Output check item (Forced on item selection parameter) (Index 7010)
Sub index Data type
0 U8
Default value
(dec)
Setting of P5L pressure confirmation lower threshold. Refer to "example of ejector
0xFF60
operation".
(-160)
Setting range (Normal): -4200+H5L to P5H
4[kPa]
Setting range (Reversed): -4200 to P5H-(H5L or H5H)*
Setting of P5H pressure confirmation upper threshold. Refer to "example of ejector
0x00A0
operation".
(160)
Setting range (Normal): P5L to 4200-H5H
-4[kPa]
Setting range (Reversed): P5L+(H5L or H5H)
Setting of H5L pressure confirmation lower hysteresis. Refer to "example of ejector
0x0028
operation".
(40)
Setting range (Normal): 0 to 4200+P5L
1[kPa]
Setting range (Reversed): 0 to (P5H-P5L)/2
Setting of H5H pressure confirmation upper hysteresis. Refer to "example of ejector
0x0028
operation".
(40)
Setting range (Normal): 0～4200-P5H
1[kPa]
Setting range (Reversed): 0～(P5H-P5L)/2
Default
Access
value
(dec)
Setting of Enable/Disable input process data forced on mode.
W - 0: Disable
1: Enable
Default
Access
value
(dec)
Setting of forced on item selection. When Output check (Input process data forced on
mode parameter) is set to enable, this parameter can be used.
When the same command is sent, output is off. The pressure measured value outputs
lower and upper values repeatedly.
0x00: Pressure measured value
0x10: Output for release valve
0x11: Output for supply valve
W - 0x20: P1 Vacuum confirmation
0x21: P2 Energy saving confirmation
0x22: P3 Release confirmation
0x23: P4 Pressure confirmation
0x24: P5 Pressure confirmation
0xA0: Valve warning
0xE0: measurement pressure diagnosis
0xEF: Error
0xFF: System error
Description
Description
Description
-30-
*Use greater value
※
to 4200 *Use greater value
Doc. No. DOC1051887