Table of Contents
Advertisement
■[F 4] Auto-preset function
This function will automatically calculate and set the optimum pressure based on the actual operating
condition, when hysteresis mode has been selected.
<Operation>
Press the UP or DOWN button in function selection mode to display [F 4].
Auto-preset function
Press the UP or DOWN button to select the auto-preset function.
Press the SET button to set.
Press the SET button in measurement mode to perform the pressure setting.
Then, press the SET button again to change the pressure while the display is flashing.
(Refer to page
37
for details.)
Press the SET button.
[F 4] Auto-preset function completed
-36-
Move on to auto-preset function.
Return to function selection mode.
No.PS※※-OMY0007-B
Advertisement
Table of Contents
