Table of Contents
Advertisement
■[F 4] Auto-preset function
This function will automatically calculate and set the optimum pressure based on the actual operating
condition, when hysteresis mode has been selected.
<Operation>
Press the
or
Auto-preset function
Press the
or
Press the
Press the
button in measurement mode to perform the pressure setting.
Then, press the
(Refer to page
41
for details.)
button in function selection mode to display [F 4].
Press the
button.
button to select the auto-preset function.
button to set.
[F 4] Auto-preset function completed
button again to change the pressure while the display is flashing.
Move on to Auto-preset function.
Return to function selection mode.
-40-
No.PS※※-OMU0009-F
Advertisement
Table of Contents
