Printing on envelopes
5. Tap the postage amount.
6. Use the keypad to enter the additional postage amount.
7. Tap the check mark when done.
8. Turn your envelope over to the blank side.
9. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you
have, feed the envelopes manually or tap Start to feed the envelopes.
The word "Correction" appears on the postage mark:
Re-dating your mail
Watch this video or follow the instructions below to learn how to redate your mail.
If you already printed today's date and postage on an envelope, but you missed your mail pickup, you
can re-date the mail. You must print a future date on the back of the envelope before you can mail it.
You can only re-date one envelope at a time, even if you are feeding envelopes automatically.
Pitney Bowes
Operator Guide
July 2023
121