Table of Contents
Advertisement
3. Make sure that the seal/no seal lever is set to the seal position (all the way to the left).
4. Place the envelopes on the feed deck. Tap Start on the Envelope Printing or Print on Envelopes
app.
If the moistener tank is full and your envelopes do not seal correctly, clean or replace the moistener
brush and wick.
Filling the moistener tank
Your device will need refills of E-Z Seal® in order to seal envelopes. Follow these steps to fill the
moistener tank.
Pitney Bowes
Operator Guide
July 2023
Quick start guide
36
Advertisement
Table of Contents
