Table of Contents
Advertisement
4. Unscrew the moistener bottle cap and fill it with Pitney Bowes E-Z Seal®. Do not overfill the
moistener bottle.
5. Screw the cap back on and place the bottle back in its original site (upside down in the device).
6. Close the feeder access cover.
7. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely wet.
Replacing the ink cartridge
Replace the ink cartridge when the low ink warning appears. This ensures your device is in optimal
working condition.
1. Tap Settings.
2. Scroll down and tap Envelope Printer Maintenance.
3. Tap Install Ink.
Pitney Bowes
Operator Guide
July 2023
Quick start guide
38
Advertisement
Table of Contents
