Printing Postage On Tapes - Pitney Bowes PCN 9H00 Operator's Manual

Quick start guide
5. Set the desired moistener setting for your envelopes. In this photo "no seal" is selected.
6. Tap Start on the Envelope Printing or Print on Envelopes app. The device automatically feeds
the envelopes and prints the postage.
If you are using a stacker, extend the stacker tray so that the envelopes exit the feeder
l
completely.
If you are moistening the envelope flaps, press down on the envelopes after printing to
l
ensure the flaps are securely glued closed.

Printing postage on tapes

If it is not possible to print postage directly onto your envelope, you can print it onto a tape. You can
then apply the tape to the envelope.
1. Push the tape lever to the right and hold it there (a). Drop a stack of strip tapes down into the slot
(b). Make sure that the printable side faces to the right (toward the touchscreen).
2. Tap Envelope Printing or Print on Envelopes on the Home screen.
3. Select the postage mode and settings (account, class and special service, weight).
Pitney Bowes Operator Guide July 2023 27