Table of Contents
Advertisement
By adding ports to the VLAN you have created one port-based VLAN group completely.
The page includes the following fields:
Object
VLAN Name
Group ID
Port
Member
All unselected ports are treated as belonging to another single VLAN. If the port-based
VLAN enabled, the VLAN-tagging is ignored.
Figure 4-4-3: Static VLAN Interface Screenshot
Description
Use this optional field to specify a name for the VLAN. It can be up to 16
alphanumeric characters long, including blanks.
You can configure the ID number of the VLAN by this item. This field is used to add
VLANs one at a time. The VLAN group ID and available range is 2-4094.
Indicate port 1 to port 26.
Defines the interface as a Port-Based member of a VLAN.
Add
Forbidden ports are not included in the VLAN.
Remove
User's Manual of WGSW-2620HP
71
Advertisement
Table of Contents
