Table of Contents
Advertisement
The page includes the following fields:
Object
System PoE Admin Mode
PoE PSU Status
PoE Temperature Unit 1
PoE Temperature Unit 2
Temperature Threshold
Over Temperature Protection
Power limit mode
PoE Usage Threshold
Power Allocation
PoE Function
Power Mode
Description
Allows user enable or disable PoE function. It will causes all of PoE ports
supply or not supply power.
Display current PoE power supply working status.
Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24
Allows setting over temperature protection threshold value. It system
temperature was over it then system lower total PoE power budget
automatically.
Enabled to prevent system too hot to damage. When POE unit temperature
rise and over Temperature Threshold value, PoE power budget will be reduced
20 watts when the temperature raised 3 Degree C each time, and PoE power
budget will going down 60 watts maximum.
For example, 360 watts is default PoE power budget and Temperature
Threshold is 50 Degree C. PoE temperature raise is going to cause PoE
Power budget changing as follow.
PoE Unit Temperature
50
51
54
57
Allow to configure power limit mode of Web Smart Device. It can choose :
Consumption Detect the real power from the PDs.
Classification Deliver PoE power by port priority setting and device
PoE power level.
Allows setting how much PoE power budget could be limited.
Show the total watts usage of PoE Switch.
Can enable or disable the PoE function.
Displays per port PoE operate status, 802.3af or 802.3at.
138
User's Manual of WGSW-2620HP
PoE Power Budget
360 watts
340 watts
320 watts
300 watts
Advertisement
Table of Contents
