Table of Contents
Advertisement
4.4.4.2 VLAN Filter
802.1Q VLAN Port Configuration
This page is used for configuring the Switch port VLAN. The VLAN per Port Configuration page contains fields for managing
ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All
untagged packets arriving to the device are tagged by the ports PVID.
This section provides 802.1Q Ingress Filter of each port from the Switch, the screen in
The page includes the following fields:
Object
NO
PVID
Figure 4-4-7: 802.1Q Ingress Filter Interface Screenshot
Description
Indicate port 1 to port 26.
Set the port VLAN ID that will be assigned to untagged traffic on a given port.
This feature is useful for accommodating devices that you want to participate in
the VLAN but that don't support tagging.
The switch each port allows user to set one VLAN ID, the range is 1~255, default
VLAN ID is 1.
User's Manual of WGSW-2620HP
Figure 4-4-7
76
appears.
Advertisement
Table of Contents
