Table of Contents
Advertisement
4.15.3.1 TOS/DSCP Configuration
The TOS/DSCP page provides fields for defining output queue to specific DSCP fields. When TCP/IP's TOS/DSCP mode is
applied, the Managed Switch recognizes TCP/IP Differentiated Service Codepoint (DSCP) priority information from the
DS-field defined in RFC2474.
Enable TOS/DSCP for traffic classification and then the DSCP to priority mapping column is configurable, as the
4-15-5
shows:
The page includes the following fields:
Object
TOS/DSCP
DSCP
Priority
Apply:
Help:
Figure 4-15-5: QoS Configuration – TOS Priority Interface Screenshot
Description
Enable / Disable internal traffic class (0~7) to map the corresponding IP DSCP
value.
The values of the IP DSCP header field within the incoming packet.
0~63.
Specify which 802.1p priority to map the corresponding IP DSCP.
The value is 0~7.
Press this button to take affect.
Provide help information of TOS/DSCP Configuration.
User's Manual of WGSW-2620HP
134
Figure
Advertisement
Table of Contents
